The composition of the magnetic filter rods

The magnetic filter bars by the seals, nuts, receivership, composition rods, front, rear cap, stick-pin connector as a whole. The peripheral wall of the cob are criss-crossing mesh sieve-like structure. When using the outer wrap after sterilization of disposable paper (Brazzaville), the front cover and cob junction fixing ring nut fixed in the filter bucket, and the filtrate from the filter into the lower end of the barrel, the outflow from the top of the filter bucket, liquid is filtered. this magnetic bar solid, no distortion, no broken, acid, heat autoclaving, filter removable, easy to clean and can be washed clean, saving time and material, to prevent cross-contamination, appropriate medicine, food industry in production.

Application and characteristics of the magnetic filter rods

The magnetic filter bars is mainly used in the pharmaceutical, chemical, brewing, drinking water and other industrial areas, used for pre-filtration liquid filtration and sterile filtration clarification. magnetic filter bar made of stainless steel, and refined through mechanical or electrolytic polishing, with excellent durability and maximum resistance to corrosion. Filter drain valve, release valve, solid-liquid interface to import and export filters are easy to clean, can be completely sterilized.

Magnetic wand works

Magnetic wand works:
The magnetic bar sets is made of stainless steel tube and high B value NdFeB rare earth alloy and special production methods made. The holder can be combined to form a magnetic filter. When the iron content of the material through, attracted by the magnetic rods, iron-containing material firmly adsorbed on the magnet wall, in order to ensure product integrity and safety equipment.
Features:
No energy, no pollution, can be installed in any position on the production line can be in contact with the material, space-saving, easy installation, magnetic rare earth magnet bars alloy NdFeB as a source, magnetic strong, simple structure, long service life, specifications style can according to customer requirements and production site arbitrary change the custom.

The nature of the magnetic filter rods

magnet bars work environment determines that it must have a certain degree of corrosion resistance, high temperature properties, and some situations require a relatively strong magnetization. By using different thicknesses of magnetic sheets can be different magnetic flux density. Select a different magnetmagnetic bar sets rods can determine the maximum magnetic flux density and temperature resistance.

Composed of a magnetic stir bar

The main magnet bars is used to filter all kinds of fine powder and liquid, semi-liquid iron impurities and other substances with a magnetic band, now widely used in chemical, food, waste recycling, carbon black and other fields.

magnetic bar sets from the inside and outside of the core and cladding composition, comprising a cylindrical magnet core and the magnet blocks and guide slices. Should do a good magnet spatial distribution of magnetic flux lines, the maximum magnetic flux density points are distributed as much as possible the entire root filled magnet, because the general is on the movement of goods and transmission lines, magnetic surfaces should be smooth and low resistance, free of environmentally harmful substances, avoid contaminated material and the environment.

A magnetic stir bar action

magnetic bar sets surface magnetic flux density proportional to the size of the smallest particles can be adsorbed in the battery, pharmaceutical and other fields of fine iron impurities can cause a great impact, so the choice of the magnet about 12,000 Gauss. Other areas you can use a little low.

magnet bars in contact with the fluid in the process using the internal magnetic energy will be part of an irreversible loss, loss exceeds the initial intensity of 30% or metal surface coating and stainless steel pipe rupture when worn, then the need to replace the magnet, and not allow leakage magnet magnet continues to work, magnets are generally more brittle surfaces coated with some oil, the environmental pollution is relatively large. Domestic magnet magnet production enterprises generally work under heavy load 1 - 2 years, seven under light load - 8 years.

Super magnet characteristics

Super magnet characteristics: effective removal of iron pole close, contact area, magnetic Super. In addition to iron container that can be customized according to user requirements processing. Mainly used in plastics, food, environmental protection, filtration, chemicals, power, building materials, pottery, medicine, powder, mining, coal and other industries.

magnetic stirring bar set with stainless steel protective sleeve all, the effective protection of the magnet to be easily damaged. Convenient and efficient discharge of iron; pull magnet bars, the magnetic adsorption filter rod automatic separation of ferromagnetic material fall. Continuous work; when the drill out of row iron materials can continue to work without pause feed.

Magnets Caution

magnetic stir bars work environment determines necessary with a certain resistance to corrosion, high temperature characteristics, and some places require a relatively strong magnetization. By using different thicknesses of magnetic sheets can be different magnetic flux density. Select a different magnet can determine the maximum magnetic flux density and temperature resistance magnetic rods, generally in order to achieve on a 1 inch diameter magnet practices look over 12,000 gauss magnetic induction models need more than N40 NdFeB magnets. High temperature magnet at a temperature above 150 degrees beyond the general choice of samarium cobalt magnets.

Magnet structure

magnetic rods core and internal and external cladding composition, comprising a cylindrical magnet core and the magnet blocks and guide slices. Should do a good magnet spatial distribution of magnetic flux lines, the maximum magnetic flux density points are distributed as much as possible the entire root filled magnet, because the general is on the movement of goods and transmission lines, magnetic stir bars surfaces should be smooth and low resistance, free of substances harmful to the environment, to prevent the contaminated material and the environment.