Electromagnetic coil core and magnetic poles allows magnetic separator

Electromagnetic coil core and magnetic poles can separator, producing a dry magnetic separator around it. So that the magnetic field between the magnetic poles and magnetized mineral particles, assuming magnetism, thereby generating a magnetic force; instead only receive weak magnetic ore particles of the magnetic force is not visually observed, resulting in separation of the magnetic mineral particles and non-magnetic mineral particles. Therefore, a better understanding of magnetic materials, including structural magnetic substance, a measure of the degree of magnetization behavior and magnetic field in the magnetization of the conveyor magnet process of understanding the nature is essential

the more obvious the interaction force between particles

To make two kinds of different permanent magnetic lifter, the necessary condition is that a strong magnetic force of the magnetic particles suffered should be more than competitive, the weaker the magnetic force of the magnetic particles suffered less than competitive. It should be noted, in practice, there can be no absolute magnetic pure magnetic products and non-magnetic products, in addition to the living body is not monomer dissociation affect product purity, some single magnetic particles into a non-magnetic products, some monomeric non-the magnetic particles into a magnetic product. In the former case, resulting in the recovery of the magnetic component is decreased, mainly due to the particle size of the magnetic particles is too small, the magnetic rods is insufficient to overcome fluid resistance and other competitive; the latter lead to decreased quality magnetic products because most of the particles of there is a strong interaction between the force, the finer the particle size, the greater the concentration of slurry

Crafts

The actual surface magnetic filter bars up to about 6,000 to 11,000 gauss, but also by the specific requirements of customers build. Due to the use of ultra-high coercivity magnetic Wang, sealed with silicone or welding and the use of special scientific craft making.

Feature

Magnetic wand features are: effective removal of iron pole close, contact area, magnetic Super. In addition to iron container that can be customized according to user requirements processing.

What is the magnet bars

magnet bars over raw material mainly used in the iron pin; filter various fine powder and liquid, semi-liquid iron impurities and other substances with a magnetic band, now widely used in chemical, food, waste recycling, carbon black, etc. field.

specification
magnetic rods specifications (∮19, ∮22, ∮25, ∮28, ∮32, ∮38 .....) product is refined through five steps. Magnetic bar from the inside and outside of the core and cladding composition, core and includes a cylindrical magnet blocks and guide magnet slices. All magnetic rods with stainless steel protective sleeve, the effective protection of magnetic wand easily damaged. Convenient and efficient discharge of iron; pull the magnetic rods, magnetic rods adsorbed automatic separation of ferromagnetic material fall. Continuous work; when the drill out of row iron materials can continue to work without pause feed [1].

What is the principle of magnetic rods ask?

magnet bars is made of stainless steel tube and high B value rare earth alloy NdFeB strong magnet, and the use of special production methods made. The holder can be combined to form a magnetic filter bars. The magnet core and internal and external cladding composition, comprising a cylindrical magnet core and the magnet blocks and guide slices. Should do a good magnetic wand spatial distribution of magnetic flux lines, the maximum magnetic flux density points are distributed as much as possible the entire root filled magnet, because the general is on the movement of goods and transmission lines, magnetic surfaces should be smooth and low resistance, when iron the substance through, attracted by the magnetic rods, iron-containing material firmly adsorbed on the magnet wall, in order to ensure product integrity and safety equipment. And the magnet does not contain environmentally harmful substances, avoid contaminated material and the environment.

How to distinguish between iron bars, copper and magnet stick

magnet bars and iron bars attract, copper points out of it, the magnet sticks and iron bars accounted for the initiative is to attract the magnet sticks, iron rods is being sucked.
Hu Peng first three rods, copper can be separated out, and then copper and magnetic stir bars to tap the magnet, you can listen to them listen to the sound.

The principle of magnetic rods

Magnetic bar is made of stainless steel tube and high B value rare earth alloy NdFeB strong magnet, and the use of special production methods made. The holder can be combined to form a magnetic filter. The magnet core and internal and external cladding composition, comprising a cylindrical magnet core and the magnet blocks and guide slices. Should do a good magnetic wand spatial distribution of magnetic flux lines, the maximum magnetic flux density points are distributed as much as possible the entire root filled magnet, because the general is on the movement of goods and transmission lines, magnetic surfaces should be smooth and low resistance, when iron the substance through, attracted by the magnetic rods, iron-containing material firmly adsorbed on the magnet wall, in order to ensure product integrity and safety equipment. And the magnet does not contain environmentally harmful substances, avoid contaminated material and the environment.